Deskripsi
Aplikasi
Digunakan untuk koreksi ketidakseimbangan (unbalance) pada benda kerja berputar, seperti rotor motor berukuran besar dan menengah, impeller, poros engkol (crankshaft), roller, serta berbagai jenis poros lainnya.
Fitur
Mesin ini menggunakan sistem pengukuran elektronik canggih dengan berbagai metode pengukuran. Mendukung proses balancing dinamis maupun statis, serta menyediakan hingga 10 jenis mode bantalan (bearing). Penambahan dan pengurangan bobot dapat dilakukan dengan fleksibel, termasuk pengaturan arah putaran searah jarum jam (CW) maupun berlawanan arah jarum jam (CCW).
Sistem ini dilengkapi dengan kombinasi koefisien kalibrasi yang beragam, mampu menyesuaikan sensitivitas secara otomatis dan berpindah mode dengan mulus tanpa lonjakan. Didukung oleh penyaringan ganda pada sisi perangkat lunak dan perangkat keras, serta kompresi data, sehingga hasil pengukuran menjadi lebih stabil dan akurat.
Spesifikasi
Applicable to small workpieces
| Technical data at a glance |
PHQ-1.6/5 |
PHQ-1.6A/5A |
PHQ-G5 |
PHA-5 |
PHQ-16A |
| Max Mass of Workpiece(kg) |
1.6/5 |
1.6/5 |
5 |
5 |
16 |
| Max Diameter of Workpiece (mm) |
Φ300 |
Φ300 |
Φ300 |
400 |
Φ300 |
| Distance Between Two Support Bearings (mm) |
15~500 |
15~500 |
15~500 |
15~500 |
15~500 |
| Journal Diameter Scope of Workpiece (mm) |
Φ 3~40(120°) |
Φ 3~40 |
Φ 3~40 |
Φ 3~40 |
Φ 3~40 |
| Diameter Scope of Driving Belt (mm) |
Φ20~85 |
Φ15~150 |
Φ20~85 |
Φ15~150 |
Φ15~150 |
| Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) |
~14701) |
~14701) |
~14701) |
0~20001) |
~14701) |
| Motor Power (kw) |
0.2DC |
0.2DC |
0.2DC |
0.2DC |
0.2DC |
| Min Achievable Residual Unbalance Amount (emar) |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
Applicable to medium workpieces
| Technical data at a glance |
PHQ-50 |
PHQ-160H |
PHQ-160Z |
PHQ-C160H |
PHQ-300H |
PHQ-500H |
| Max Mass of Workpiece(kg) |
50 |
160 |
160 |
160 |
300 |
500 |
| Max Diameter of Workpiece (mm) |
Φ700 |
Φ1000 |
Φ300 |
400 |
Φ1220 |
Φ1500 |
| Distance Between Two Support Bearings (mm) |
80~700 |
130~1270 |
130~1270 |
130~1270 |
130~1270 |
130~1270 |
| Journal Diameter Scope of Workpiece (mm) |
Φ 15~755) |
Φ 15~753) |
Φ200-300 |
Φ200 |
Φ 15~753) |
Φ 15~753) |
| Diameter Scope of Driving Belt (mm) |
Φ18~200 |
Φmax400 |
Φmax300 |
Φmax400 |
Φmax500 |
Φmax600 |
| Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) |
700,10501) |
~1176 |
75001) |
756,11761) |
~1176 |
~1176 |
| Motor Power (kw) |
0.752) |
1.52) |
42) |
1.52) |
1.52) |
2.22) |
| Length of Bed (mm) |
|
1500 |
|
|
1500 |
1500 |
| Min Achievable Residual Unbalance Amount (emar) |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
Applicable to large workpieces
| Technical data at a glance |
PHQ-1000H |
PHQ-2000H |
PHQ-3000H |
PHQ-5000 |
| Max Mass of Workpiece(kg) |
1000 |
2000 |
3000 |
5000 |
| Max Diameter of Workpiece (mm) |
Φ1600 |
Φ1800 |
Φ2100 |
Φ2400 |
| Distance Between Two Support Bearings (mm) |
160~1780 |
160~1780 |
160~2280 |
500~2200 |
| Journal Diameter Scope of Workpiece (mm) |
Φ25~1204) |
Φ25~1204) |
Φ25~1204) |
Φ40~380 |
| Diameter Scope of Driving Belt (mm) |
Φ40~700 |
Φ40~800 |
Φ40~900 |
Φ50~1000 |
| Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) |
795,19181) |
795,9861) |
795,13151) |
795,18531) |
| Motor Power (kw) |
42) |
5.52) |
7.52) |
152) |
| Length of Bed (mm) |
2000 |
2000 |
2500 |
2500 |
| Min Achievable Residual Unbalance Amount (emar) |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.15g· mm/kg |
≤0.25g· mm/kg |
Applicable to huge workpieces
| Technical data at a glance |
PHQ-10000H |
PHQ-15000H |
PHQ-20000H |
| Max Mass of Workpiece(kg) |
10000 |
15000 |
20000 |
| Max Diameter of Workpiece (mm) |
Φ2400 |
Φ2800 |
Φ2800 |
| Distance Between Two Support Bearings (mm) |
750~4600 |
750~5600 |
750~5600 |
| Journal Diameter Scope of Workpiece (mm) |
Φ 60~400 |
Φ60~400 |
Φ60~400 |
| Diameter Scope of Driving Belt (mm) |
Φ50~1000 |
Φ50~1300 |
Φ50~1300 |
| Rotational Speed when the Diameter of Driving Belt is 100mm (r/min) |
795,18531) |
795,18531) |
795,18531) |
| Motor Power (kw) |
18.52) |
222) |
302) |
| Length of Bed (mm) |
2500 |
2500 |
2500 |
| Min Achievable Residual Unbalance Amount (emar) |
≤0.5g· mm/kg |
≤0.5g· mm/kg |
≤0.5g· mm/kg |
1) Stepless speed regulation
2) Frequency conversion
3) Can add to 75-180
4) Can add to 120-240
5) Can add to 75-140
Ulasan
Belum ada ulasan.